Powersprint Online-Shop/Newest shop articles

Powersprint sports exhaust system 217,00 €

Sports exhaust system with European homologation for street use.
Tailpipe SA2: 2-pipe, round, 2x Ø 70 mm.

High quality stainless steel technology.

High Performance exhaust mounting part 5,50 €

Universal exhaust mounts made of heat resistant and weather resisting silicone VMQ for highest demands and best rigidity. Ideal for the use in competition cars under hardest conditions.

POWERSPRINT high performance mounting parts are ultra high temperature resistant
(-55°C up to 220°C), unlike standard exhaust mounts made of natural rubber (-50°C up to +90°C).

High Performance exhaust mounting part 6,50 €

High Performance exhaust mounting part 7,50 €

High Performance exhaust mounting part 6,75 €

High Performance exhaust mounting part 7,50 €

High Performance exhaust mounting part 6,75 €

Exhaust collector 4x 50 mm Ø into 1x 76 mm Ø 98,00 €

Exhaust collector to be used for the construction of downpipes and manifolds.
Both, the pipe bending and conjunction, support an optimized gas flow.
Additional space between the pipes allow easier processing.

4x 50 mm Ø inside into 1x 76 mm Ø outside
Total length approx. 280 mm
Wall thickness 1.5 mm

Material 304 ASI stainless steel

Exhaust collector 3x 50 mm Ø into 1x 76 mm Ø 88,00 €

Exhaust collector to be used for the construction of downpipes and manifolds.
Both, the pipe bending and conjunction, support an optimized gas flow.
Additional space between the pipes allow easier processing.

3x 50 mm Ø inside into 1x 76 mm Ø outside
Total length approx. 280 mm
Wall thickness 1.5 mm

Material 304 ASI stainless steel

Exhaust collector 2x 50 mm Ø into 1x 63.5 mm Ø 58,00 €

Exhaust collector to be used for the construction of downpipes and manifolds.
Both, the pipe bending and conjunction, support an optimized gas flow.
Additional space between the pipes allow easier processing.

2x 50 mm Ø inside into 1x 63.5 mm Ø outside
Total length approx. 280 mm
Wall thickness 1.5 mm

Material 304 ASI stainless steel

Tailpipe „Racing“ - 50 mm Ø - straightly cut 18,50 €

Stainless steel motorsports tailpipe for welding on.
Cut version with brushed surface.

Type: straightly cut
Connection diameter outside 50 mm
Total length approx. 300 mm
Wall thickness 1,5 mm

Material 304 ASI stainless steel

Tailpipe „Racing“ - 50 mm Ø - diagonally cut 20,50 €

Stainless steel motorsports tailpipe for welding on.
Cut version with brushed surface.

Type: diagonally cut
Connection diameter outside 50 mm
Total length approx. 300 mm
Wall thickness 1,5 mm

Material 304 ASI stainless steel

X-pipe - 4x60 mm Ø outside 59,50 €

Connection diameter outside 4x60 mm Ø
Total length ca. 370 mm
Wallthickness 1,5 mm

Material 304 ASI stainless steel

Mini control catalytic converter for motorsports 95,00 €

The supercharged MINI control cat can be applied whenever a catalytic converter is removed from the exhaust system or shifted to another position within the whole system, effecting a discrepancy of the measured reduction value. Also the use of a 100 cell race cat can cause the application of the MINI control cat. It has to be applied into the intake of the second lambda sensor, screwed between exhaust pipe and lambda sensor, supplying the second lambda sensor with toxic reduced exhaust gas data. Normally it is not necessary to adjust the control electronic additionally.

Lambda sensor connection diameter inside/outside M18 x 1,5 mm
Dimension (diameter x length) 35 mm x 85 mm
Total length 93 mm

Attention! Only for the use in motorsports, not allowed within the
Road Traffic Licensing Regulations!